Rexroth hydraulic vane pump PV7 -2X/20-25 RA01 MA0-10, Shanghai Weimi Mechanical and Electrical Equipment Co., Ltd. Main supply products, product pictures in kind shooting, original factory, warranty for one year, a large number of products in stock supply, price concessions Quick quote, Contact: Lei Qing Welcome to purchase!
 
Rexroth REXROTH vane pump
R900950955 PV7-2X/20-25RA01MA0-10
Variable displacement pump, size 25 ccm, pressure 100 bar, for industrial applications, open circuit
High reliability. Low noise and low pulsation levels. High efficiency. Fast response behavior of the controller.
pressure controller
With NBR seal
product attribute
displacement type   variable
size [cm³]   25
Product Series   PV7… A
High working pressure [bar]   100
High flow [l/min]   45
By driving   without
Rotation direction   Rotate clockwise
Shaft end   cylindricalØ 25 mm with assembly key, ISO 3019-2
Mounting flange 4-   hole mounting flange according to ISO 3019-2 100B4HW
Hydraulic oil   HLP, HLPD, HVLP, HVLPD
Trouble   NBR
Weight [kg]   11.34

Rexroth REXROTH Proportional Relief Valve DBETE-6X/315 G24 K31 A1 V
R901029969 DBETE-62/315G24K31A1V
Nominal size 6, P→ T, electrical with integrated electronics, 24 V DC
Industrial hydraulic valves in the high performance range. Reliable pressure limiting to setpoint signal.
Pressure class 315 bar
direct acting
Connection diagram   ISO 4401-03-02-0-05
Pressure [bar]   420
Volume flow [l/min]   2
Piston Symbol   P→ T
Connection Type   Plate Structure
Nominal size   6
Drive Type   Electrical Belt Integrated Electronics
Number of connections   2
Number of switch positions   2
Supply voltage   24 VDC
Electrical plug   7 pin device plug (6 + PE)
Electrical connection instructions   7-pin device plug (6 + PE) according to EN 175201-804
Connect   analog, setpoint 0… 10 V
Statement of conformity   CE -Electromagnetic compatibility 2014/30 / EU
Hydraulic fluids   HL,HLP,HLPD,HVLP,HVLPD,HETG,HEES,HEPG,HFDU,HFDR
Sealed   FKM
Weight [kg]   1.601

Rexroth REXROTH Proportional Relief Valve DBETE-6X/200YG24K31A1V
R901064677 DBETE-62/200YG24K31A1V
Nominal size 6, P→ T, P→ Y, electrical with integrated electronics, 24 V DC
Industrial hydraulic valves in the high performance range. Reliable pressure limiting to setpoint signal.
Pressure class 200 bar
direct acting
Connection diagram   ISO 4401-03-02-0-05
Pressure [bar]   420
Flow rate [l/min]   2
Machine symbols   P→ T, P→ Y
Connection Type   Base Plate Installation
size   6
Drive type   Electrical with integrated electronics
Number of Ports   3
Number of switch positions   2
Power supply voltage   24V DC
Electrical connector   joint 7 poles (6+PE)
Electrical connection description   Connector 7 poles (6+PE) according to EN 175201-804
Connectivity   simulation, command value 0… 10 V
Statement of conformity   CE– Electromagnetic compatibility 2014/30/EU
Hydraulic fluids   HL, HLP, HLPD, HVLP, HVLPD, HETG, HEES, HEPG, HFDU, HFDR
Seal   FKM
Weight [kg]   1.56

Rexroth REXROTH Pilot Proportional Pressure Reducing Valve
DRE, DREE
R900932943 DRE6-11/100MG24K4M
0811402055 DRE6X-11/175MG24-8NZ4M
strength 6
Component Series 1X
High working pressure 210 bar
High flow rate 30 l/min
Connection Type  Base Plate Installation
Port mounting surface  ISO 4401-03-02-0-05
Installation position  arbitrary
Ambient temperature range -20… +70℃
Storage temperature range -20… +80℃
Degree of protection according to EN 60529 IP65 (if a suitable and correctly installed connection plug is used)
Compliance CE  EN 61000-6-2 and EN 61000-6-3 checked according to EMC Directive 2014/30/EU
Hydraulic oil temperature range -20… +80℃
Viscosity range  15… 380mm²/s
Large permissible contamination of hydraulic oil, cleanliness class 20/18/15 according to ISO 4406 (c) 
Pilot flow  0.65l/min
High flow rate  30l/min
Mineral oil  HL, HLP
Suitable sealing materials  NBR, FKM
Lag ± 2.5%
Repeatability <±2%
Linearity ± 3.5%
Manufacturing tolerance of pressure characteristic curve of control value ± 2-3%
Step response ≈ 150ms
Power supply  24VDC
Small control current  100mA
Large control current  1600mA
resistance of electromagnetic coil
Low° temperature value at 20 C  5Ω
High temperature  7.5Ω
Duty cycle  100%
Current consumption  1.5A
External safety device 2A. time delay
import
Voltage  0… 10V
Current  4… 20mA
For pressure relief in connection A (with pressure limiting device)
Operated by proportional electromagnets
For base plate mounting
Oil port mounting surface according to ISO 4401-03-02-0-05
When operating with external control electronics, manufacturing tolerances of the setpoint pressure characteristic curve are small by means of electrical regulation
Minor constant pressure in connection A
With integrated electronics (OBE), optional
CE compliant with EMC Directive 2014/30/EU
DRE(E) valves are electronically controlled pilot operated three-way pressure reducing valves that provide pressure limitation for electrical appliances. This valve is used to reduce system pressure.
The valve basically consists of a pilot control valve, a proportional magnet, and a main valve with a main control spool.
Model DRE
The pressure to be reduced is adjusted in channel A according to the setpoint value by means of a proportional magnet.
When using the relieved port P, the spring holds the main control spool in the initial position.
thereby opening the A to T connection and blocking the P to A connection.
Pressure connection from connection P to annular channel.
Pilot oil flows from the bore to connection T, through the flow regulator, through the nozzle to the pilot control valve, through the restriction gap to the longitudinal groove and bore.
decompression
Pilot pressure builds up in the control chamber as a function of the setpoint.
Move the main control spool to the right and hydraulic oil flows from P to A.
The consumer pressure is established in connection A of the spring chamber via the channel and the nozzle.
Raise the pressure in port A to the set pressure of the pilot control valve, which causes the main control spool to move to the left. The pressure in port A is approximately the same as the set pressure of the pilot control valve.
pressure limit
If the pressure in port A exceeds the set pressure of the pilot control valve, the main control spool continues to move to the left.
thereby breaking the connection from A to T and limiting the pressure generated in interface A to the set point.
DREE– with integrated electronics (OBE)
These valves conform to DRE type both functionally and structurally. The proportional magnet is also fitted with a housing with control electronics.
Connect mains voltage and setpoint voltage or setpoint current via device plug.
Fine-tune the setpoint pressure characteristic curve at the factory with a small sample deviation.

Rexroth REXROTH proportional pressure reducing valve
Pressure relief valve DRE6-1X/100MG24K4M
R900932943 DRE6-11/100MG24K4M
Nominal size 6, P→ A, electrical with external amplifier, 24 V DC
Industrial hydraulic valves in the high performance range. Signal to reliably reduce pressure to set point.
slide valve
pilot-operated
Connection diagram   ISO 4401-03-02-0-05
Pressure [bar]   315
Volume flow [l/min]   30
Piston Symbol   P→ A
Connection Type   Sheet Structure
Nominal size   6
Drive type   Electrical belt External electronic components
Number of connections   3
Number of switch positions   2
Supply voltage   24 VDC
Electrical plug   Equipment plug 3 pins (2 + PE)
Electrical connection description   3-pin device connector (2 + PE) according to EN 175301-803
Hydraulic fluids   HL,HLP,HLPD,HVLP,HVLPD,HFC
Seal   NBR
Weight [kg]   1.86

Rexroth REXROTH Pilot Proportional Pressure Reducing Valve
DRE(M) 10, DRE(M) 20
R901279577 DREM10-61/200YG24-8K4M
Size 10, 25
Component Series 6X
High working pressure 315 bar
High flow rate 300 l/min
Installation position  arbitrary
Weight  4.7kg  6kg
Storage temperature range -20… +80℃
Ambient temperature range -20… +70℃
Pilot flow  0.8l/min
High flow rate  200l/min  300l/min
Hydraulic oil temperature range -20… +80℃
Viscosity range  15… 380mm&sup2;/s
Large permissible contamination of hydraulic oil, cleanliness class  20/18/15 according to ISO 4406 (c)
Lag ± 3.5%
Repeatability <±2%
Linearity ± 2%
Manufacturing tolerance of pressure characteristic curve of control value ± 3.5
Step Response 10... 90%  ≈ 130ms
characteristic
Valve for reducing system pressure
Operated by proportional electromagnets
Proportional electromagnet with rotatable and detachable coil
For base plate mounting: port mounting surface according to ISO 5781
Third oil path A to Y (φ7.5 mm)
Linearized pressure/setpoint characteristic curve
Good transient response
Optional check valve can be installed between A and B
Optional high pressure limit
DRE(M) valve is a pilot operated pressure reducing valve. These valves can be used to reduce operating pressure.
The basic components of these valves are a pilot control valve with proportional solenoid, a main valve with main spool, and an optional check valve.
Model DRE...
The pressure in channel A can be set according to the control value by means of proportional electromagnets.
The spring holds the main spool in its initial position at rest, i.e., when there is no pressure in passage B. The connection from channel B to channel A is closed. Therefore, start-up jumps can be avoided.
Pressure applied in passage A acts on the face of the main spool through the bore. Pilot oil flows from passage B through the orifice to constant current control, which keeps pilot flow constant regardless of the pressure drop between passages A and B. pilot flow
The constant current control flows into the spring chamber, through the holes and, through the valve seat, into passage Y and back from there. Preset the desired pressure in channel A via the associated amplifier. The proportional solenoid moves the valve holder toward the valve seat and limits the pressure in the spring chamber to the set value. If the pressure in passage A is below the preset control value, the higher pressure in the spring chamber will shift the main spool to the right. The connection from B to A is open. If the setpoint pressure at A has been reached, the forces at the main spool are balanced-the main spool is in the control position.
Pressure at spool end of channel A = spring force at spool end of spring chamber–
If the pressure at A (e.g.) is to be reduced in a vertical hydraulic cylinder (e.g. cylinder piston in cut-off position), a lower control value can be preset via the control electronics, so that the lower pressure value is preselected and immediately appears in the spring chamber. The higher pressure value acting on the main spool surface at A pushes the main spool toward the protection plug to the OFF position. The connection A to B is blocked and the connection A to Y is open. The force at the spring is now opposed to the hydraulic force acting on the main spool surface. At this main spool position, hydraulic oil can flow from passage A through the control edge to Y into return.
When the pressure at A drops to the sum of the pressure in the spring chamber and p of the spring, the main spool closes the large control orifice in the socket at control edge A to Y.
The residual pressure difference with respect to the new control value at A is approx. 10 bar and the current pressure can only be relieved via the control orifice. This results in a good transient response without pressure undershoot. In order to achieve free backflow from channel A to channel B, a check valve can be optionally installed. Part of the charge flow at passage A can also flow back through the open main spool A to Y control edge.
Model DREM...
In order to provide hydraulic protection against excessive pressure at port A due to impermissible high electrical control currents on the proportional solenoid, a spring-loaded relief valve may optionally be installed to limit high pressures. This high pressure limit is preset based on the relevant pressure level.



Rexroth REXROTH Pilot Proportional Relief Valve
(Z)DBE 6, (Z)DBEE 6
R901335463 ZDBEE6VP2-21/315G24K31A1M
strength 6
Component Series 2X
High working pressure 350 bar
High flow rate 30 l/min
Installation position  arbitrary
Weight  2.5kg
Storage temperature range -20… +80℃
Ambient temperature range -20… +70℃
Return Pressure Return Pressure Port A, External Pilot Oil
High flow rate  30l/min
Hydraulic oil temperature range -20… +80℃
Viscosity range  15… 380mm&sup2;/s
Large permissible contamination of hydraulic oil, cleanliness class  20/18/15 according to ISO 4406 (c)
Lag ± 3%
Repeatability <±2%
Linearity ± 3.5%
Manufacturing tolerance of control value pressure characteristic curve, related to hysteresis characteristic curve and pressure increase 
Hydraulic oil  HL, HLP
Suitable sealing material  NBR/FKM
Large coil current  1760mA
electromagnetic coil resistance 
Low° temperature value 5.5 at 20 C Ω
High temperature value  8.05Ω
Duty cycle  100%
Power supply  24VDC
characteristic
Pilot operated proportional valve to limit system pressure  opens and relieves pressure to return to tank
Controlled by proportional electromagnet
Proportional electromagnet with rotatable and detachable coil
For base plate mounting or superimposed valve plate design: port mounting surface according to ISO 4401-03-02-05 and DIN24340
Valve and control electronics are from the same family
External control electronics for models DBE and ZDBE
Linearized pressure/setpoint characteristic curve
Models DBEE and ZDBEE with integrated electronics (OBE)
SetPoint Manufacturing tolerances for pressure characteristic curves are small
(Z) Type DBE pilot-operated proportional relief valve is activated by proportional solenoid. This valve can be used to limit system pressure. Depending on the electrical control value, these valves can be used for stepless setting of the system pressure to be limited. The basic components of these valves are the pilot control stage and the main stage. The pilot control assembly consists of a proportional solenoid, a frame, and a seat. The main stage consists of a housing and main spool assembly. Proportional electromagnets convert electrical current proportionally into mechanical force. An increase in current results in a corresponding increase in coil magnetism. The system pressure can be set according to the control value via proportional electromagnets. The pressure applied by the system to passage P acts on the right side of the main spool assembly. At the same time, system pressure will act on the spring-loaded side of the spool through the control circuit equipped with the nozzle. Through the seat of the pilot line, the pressure at the spring chamber frame overcomes the force of the proportional solenoid. When the pressure reaches a preset value, the valve frame is lifted from the seat. Pilot oil (depending on the model) can now drain either to the outside through port A (Y) or to the internal tank, which also limits the pressure on the spring-loaded side of the main spool. If system pressure continues to ramp up, high pressure on the right side of the spool will push the spool to the left to the P to T control position. At small control currents (corresponding to zero control values), the small setpoint pressure will be set.
Watch out!
Prevent empty tank line operation. A preload valve (preload pressure approx. 1 bar) must be installed under the appropriate installation conditions.
Model (Z)DBEE pilot-operated proportional relief valves are activated by proportional solenoids. This valve can be used to limit system pressure. Depending on the electrical control value, these valves can be used for stepless setting of the system pressure to be limited. The basic components of these valves are the pilot control stage and the main stage. The pilot control assembly consists of a proportional solenoid, a frame, and a seat. The proportional electromagnet is also equipped with a housing with control electronics. Apply the supply voltage and control value voltage to the connector. The pressure characteristic curve of the control value is adjusted to very low manufacturing tolerances at the factory. The main stage consists of a housing and main spool assembly. Proportional electromagnets convert electrical current proportionally into mechanical force. An increase in current results in a corresponding increase in coil magnetism. The system pressure can be set according to the control value via proportional electromagnets. The pressure applied by the system to passage P acts on the right side of the main spool assembly. At the same time, system pressure will act on the spring-loaded side of the spool through the control circuit equipped with the nozzle. Through the seat of the pilot line, the pressure at the spring chamber frame overcomes the force of the proportional solenoid. When the pressure reaches a preset value, the valve frame is lifted from the seat. Pilot oil (depending on the model) can now drain either to the outside through port A (Y) or to the internal tank, which also limits the pressure on the spring-loaded side of the main spool. If system pressure continues to ramp up, high pressure on the right side of the spool will push the spool to the left to the P to T control position. At small control currents (corresponding to zero control values), the small setpoint pressure will be set.
Watch out!
Prevent empty tank line operation. A preload valve (preload pressure approx. 1 bar) must be installed under the appropriate installation conditions.
R901304331 DBE6-21/100G24K4M


Rexroth REXROTH proportional relief valve
Model DBEP
Diameter 6
1X Series
High working pressure 100 bar
High flow rate 8 L/min
- Valve used to limit system pressure
- Proportional electromagnetic drive
- Base plate mounting: mounting surface according to DIN 24 340 Type A6
- Valve integrated with electronic controller
- Electric control unit
Eurocard Specifications Analog Amplifier VT-VSPA1-1 (1 x EM)
VT 2000 (1 electromagnetic lamp)
VT 3000 (1 ramp);
VT 3006 (5 ramps);
European Card Specifications Digital Amplifier VT-VSPD1-1
- Optional special protection device
DBEP proportional relief valve is a proportional solenoid valve, which converts the input electrical signal into a pressure output signal to limit the system pressure.
Proportional electromagnetic transformer is a controllable wet DC electromagnetic transformer, which converts current value into mechanical force proportionally. The increase of current value will lead to the corresponding increase of electromagnetic transformer output force. The set electromagnetic force remains stable throughout the entire control stroke.
Proportional relief valve is mainly composed of one or two proportional solenoid valve, valve body, spool) and one or two cone valves.
Proportional electromagnetic force acts on the cone valve, pressure in port A acts on the cone valve through the semicircular hole in the spool, and the driving force is proportional to the electromagnetic force.
If the driving force is greater than the electromagnetic force, the cone valve moves left, and the oil passage from port A to port T is connected. The pilot oil flows until the thrust and electromagnetic torque are balanced again.
Proportional relief valve can be adjusted steplessly by proportional solenoid. At rest position, such as proportional solenoid switch off, port A, B and P and T port communication, oil without damping back to the tank. The flow from port P to port A or port B is limited by a restriction in the spool.
Watch out!
In order to optimize the function of the valve, it must be bled at the beginning of operation:
- Remove screws 8, 9,
- Fill with oil via open threaded holes 8, 9
- Screw in screws 8 and 9 until there are no more bubbles.
To prevent emptying of the return tank line, a back pressure valve (back pressure approx. 2 bar) should be installed in the return line in some cases.
summarize
install any
Storage temperature range -20 to +80° C
Ambient temperature range -20 to +70° C
Weight Type C  2.6kg
Type A and B  1.6kg
hydraulic pressure
Working pressure Port P  50 to 100bar
Ports A, B  0 to 50bar
Port T  30bar 
Flow rate (∆p = 50 bar) Type C  8L/min 
(with orifice“ 06”) Type A and B  4L/min 
Oils Mineral oils (HL, HLP) to DIN 51 524; Phosphates (HFD-R)
Fluid temperature range  -20 to +80° C
Viscosity  2.8 to 380mm &sup2;/s
High contamination level of the fluid according to ISO 4406 (C) 20/18/15 (in hydraulic systems the required cleanliness level of the component must be achieved, effective filtration prevents problems and prolongs the service life of the component).
Hysteresis ≤3%
Repeatability  ≤1%
Response Sensitivity  ≤1%
Reverse error  ≤1%
electric
Power Supply  24 V DC
Nominal current of electromagnet  700mA
Coil resistance° measured 19.5 at 20 C Ω 
Value  28.8Ω 
Coil temperature  to 150° C
Continuous load time  100%
Electrical wiring with sockets according to DIN EN 175 301-803; connectors according to DIN EN 301-803 2)
Valve protection class according to DIN 40 050  IP (with fixing and mounting plugs)
electric controller
European card specification amplifier (order separately)
Simulation VT-VSPA1-1 see sample RC 30 111  only for type A or B
 VT2000 simulation see sample RC 29 904  only for type A or B
VT3000 simulation with 1 ramp see sample RC 29 935
VT3006 simulation with 5 ramps see sample RC 29 926
Digital VT-VSPD-1 see sample RC 30 123
German Rexroth REXROTH Proportional Relief Valve Order No. and Model:
R900573436 ZDBEP6A06-13/45AG24NK4M


Rexroth REXROTH Direct acting directional slide valve with electromagnetic activation
WE 6... E
strength 6
Component Series 6X
High working pressure 350 bar
High flow rate (DC) 80 l/min
High flow rate (AC) 60 l/min
Three-position four-way, two-position four-way or two-position three-way model
Oil port mounting surface according to ISO 4401-03-02-0-05 (with or without holes)
High power coil, optional rotation 90°
Electrical connections as single or centered connections
Auxiliary controls, optional
Spool position monitoring, optional
CE>> compliance with Low Voltage Directive 2014/35/EU at 50 VAC or 75 VDC
Solenoid coil is an approved component with UR marking to UL 906, version 1982, optional
CSA certified, optional
The directional valve for WE models is a solenoid operated directional spool valve that can be used as a solenoid assembly. They are used to control the start, stop and direction of flow.
The directional valve basically consists of a housing, one or two electromagnets, a control spool and a return spring.
In the de-energized state, the control spool is held in the neutral or initial position by the return spring (except version O).
When the electromagnet in the hydraulic oil is switched on, the control spool is moved from its rest position to the desired end position. This signals the desired flow direction based on the selected symbol.
When the solenoid is switched off, the control spool is pushed back to the neutral or initial position (except valves with OF and valves without spring type O
Auxiliary operation allows manual switching of the valve without energizing the magnet.
The hydraulic system must be properly vented to ensure proper operation.
Without spring return" O" (symbols A, C and D only)
This model is a directional valve with two switching positions and two electromagnets without actuator. Valves without spring return at the control spool have no defined initial position in the de-energized state.
Without spring return, with device" OF" (symbols A, C and D only)
This model is a directional valve with two switch positions and two electromagnets with actuators. The control valve core is fixed in the corresponding switching position through the device. Therefore, no current needs to be applied to the electromagnet during operation, which contributes to energy-saving operation.
Model 73... A12" (soft handoff behavior)
The combination of control spool and solenoid reduces the number of reversing strokes that occur when the valve opens or closes. The reversing stroke (measured as acceleration value a) can be reduced by approximately 85% compared to standard valves, depending on the type of control spool (see acceleration value).
Note:
Pressure spikes in drain lines connecting two or more valves may cause unintended control spool movement on models with actuators. It is recommended to lay a separate return line or install a check valve in the drain line.
Due to the design principle, internal leakage occurs in the valve, and the leakage volume increases during the service life.
throttle insert
Depending on the prevailing operating conditions, throttle inserts will be required if flow exceeding the performance limits of the valve is likely to occur during switching.
Technical data:
weight
Solenoid valve with one coil  1.45kg
Solenoid valve with two coils  1.95kg
Installation position  arbitrary
ambient temperature range
standard models
NBR Seal-20... 50℃
FKM Seals-15... 50℃
Storage temperature range 5... 40℃
work stress 
Standard model  350bar
Model“ SO407” 315bar
flow
standard models
Voltage DC  80l/min
Model“ SO407” 60l/min
AC voltage AC  60l/min
Hydraulic oil temperature range
NBR Seal-20... 80℃
FKM Seals-15... 80℃
Viscosity range 2.8... 500mm²/s
Permissible contamination of hydraulic oil in accordance with ISO  4406  (c) cleanliness class  20/18/15
German Rexroth REXROTH solenoid valve Order No. and model:
R900561180 3WE6A62/EG24N9K4
R900915873 3WE6A62/EG24N9K4/V
R900935575 3WE6A62/EG220N9K4/V
R900915672 3WE6A62/EW230N9K4
R978017740 3WE6A6X/EG24N9K4/62
R900561270 3WE6B62/EG24N9K4
R900948958 3WE6B62/EG24N9K4/V
R900907814 3WE6B9-62/EG24N9K4
R900561272 4WE6C62/EG24N9K4
R900901748 4WE6C62/EW110N9K4
R900908879 4WE6D62/EG110N9K4
R900944594 4WE6D62/EG110N9K4/V
R900561274 4WE6D62/EG24N9K4
R900564105 4WE6D62/EG24N9K4/V
R900908590 4WE6D62/EG24N9K4/B12
R900903081 4WE6D62/EG205N9K4
R900916984 4WE6D62/EG220N9K4
R901008688 4WE6D62/EG220N9K4/V
R900551704 4WE6D62/EW110N9K4
R900909559 4WE6D62/EW230N9K4
R900917825 4WE6D62/EW230N9K4/V
R901483086 4WE6D62/OFEG110N9K4/B12
R900567512 4WE6D62/OFEG24N9K4
R900907727 4WE6D62/OFEG24N9K4/B08
R900903465 4WE6D62/OFEG24N9K4/V
R900920691 4WE6D62/OFEG220N9K4
R900922533 4WE6FB62/EG24N9K4
R900567997 4WE6J73-62/EG24N9K4/A12
R900561290 4WE6JA62/EG24N9K4
R900931967 4WE6JA62/EG24N9K4/B08
R900901751 4WE6L62/EG24N9K4
R900903463 4WE6L62/EG24N9K4/V
R900577475 4WE6M62/EG24N9K4
R900571012 4WE6R62/EG24N9K4
R900905896 4WE6Y62/EW110N9K4
R900556472 4WE6Y62/EG24K4QMAG24
R900561276 4WE6Y62/EG24N9K4
R900909178 4WE6Y62/EG24N9K4/B08
R900917497 4WE6Y62/EG24N9K4/B10
R900922335 4WE6Y62/EG220N9K4
R900765505 4WE6Y62/EG26N2K4K
R901073870 3WE6A62/OFEG220N9K4
R901235381 4WE6D46-62/OFEG24N9K72LSO407
R900561274 4WE6D6X/EG24N9K4
R900574632 4WE6D62/EG24K4QMBG24
R900909559 4WE6D6X/EW230N9K4
R900546257 4WE6D73-62/EG24N9K4/A12
R900924524 4WE6D73-62/EG24N9K4/A12V
R901235374 4WE6D73-6X/EG24N9K72L/A12
R901235373 4WE6D73-62/EG24N9K72L/A12=AN
R900927437 4WE6D73-62/EG24N9K4/A12B10
R900561278 4WE6E62/EG24N9K4
R900903464 4WE6E62/EG24N9K4/V
R900921477 4WE6E62/EG24N9K4/B10
R900558641 4WE6E62/EW110N9K4
R900912492 4WE6E62/EW230N9K4
R901259406 4WE6E73-62/EG24N9K72L/A12=AN
R900561280 4WE6EA62/EG24N9K4
R900561281 4WE6EB62/EG24N9K4
R901162080 4WE6EB62/EG220N9K4
R901034409 4WE6E6X/BG24NXDZ2/V
R900551703 4WE6J62/EW110N9K4
R900908878 4WE6J62/EG110N9K4
R900561288 4WE6J62/EG24N9K4
R900901045 4WE6J62/EG24N9K4/B08
R900548271 4WE6J62/EG24N9K4/B10
R900922535 4WE6J62/EG24N9K4/B20
R900911762 4WE6J62/EW230N9K4
R900912079 4WE6J62/EW230N9K4/B10
R900548772 4WE6J62/EG24N9K4/V
R900922207 4WE6J62/EG220N9K4
R901235012 4WE6J62/EG24N9K72L
R900548271 4WE6J6X/EG24N9K4/B10
R900765511 4WE6J62/EG26N2K4K
R900561291 4WE6JB62/EG24N9K4
R900932917 4WE6JB62/EG24N9K4/V
R900561292 4WE6Q6X/EG24N9K4
R901235370 4WE6Q62/EG24N9K72L
R900942675 4WE6PA62/EG24N9K4
R901396247 4WE6U62/EG110N9K4/V
R900940418 4WE6Y11-62/EG24N9K4
R900909415 4WE6Y62/EW230N9K4
R900923204 4WE6Y62/EG24N9K4QMAG24
R900561286 4WE6H62/EG24N9K4
R900549534 4WE6HA62/EG24N9K4
R900912494 4WE6H62/EW230N9K4
R900913702 4WE6H73B62/EG24N9K4/A12
R900561282 4WE6G62/EG24N9K4
R900912493 4WE6G62/EW230N9K4
R900561284 4WE6GA62/EG24N9K4
R900578186 4WE6UA62/EG24N9K4
R901396248 4WE6U62/EG220N9K4/V
R901509281 4SEC6E2X/G24N9K4
R900962555 4WE6E6X/EG24K4QR0G24S
R900969834 4WE6G6X/EG24N9K4/A12
R900917184 4WE6J73-6X/EG96N9K4/A12

Rexroth REXROTH solenoid valve
R900912495 4WE6HA62/EW230N9K4
R900912495 4WE6HA6X/EW230N9K4
Nominal size 6, symbol H, electromagnetically operated, 230 V AC 50/60Hz
Hydraulic valve, directional valve, directional switch valve, directional spool valve, hydraulic directional spool valve, electromagnetic directional valve
Industrial hydraulic valves in the high performance range. Reliable switching of oil flow direction according to hydraulic symbol.
slide valve
direct drive
product attribute
Connection diagram   ISO 4401-03-02-0-05
Product Series WE6./ E
Operating pressure [bar]   350
Flow rate [l/min]   50
Slide valve symbol   Symbol HA
size 6.
Drive Type   Solenoid Drive
Number of ports 4.
Number of switching positions 2.
Supply voltage   230 VAC 50/60Hz
Electrical connector   3 pole connector (2+PE)
Electrical connection description   3-pole connector (2+PE) according to EN 175301-803
   CE– Low Voltage Directive 2014/35/EU
Hydraulic fluids   HL, HLP, HLPD, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.32
Plug-in connector R901017011 3P Z4 M SW-SPEZ
MATCH CONNECTOR, 3 POLE (2+PE) EN 175301-803, NO CIRCUIT, BLACK
Plug-in connector R9010170103P Z4 M GR SPEZ.
Mating connector, 3 pole (2+PE) EN 175301-803, no circuit, grey
Plug-in connector R901017022 3P Z5L M 12-240V SPEZ
MATCH CONNECTOR, 3 POLES (2+PE) EN 175301-803 WITH LED, BLACK


Rexroth REXROTH solenoid valve
R900561274 4WE6D62/EG24N9K4
R900561274 4WE6D6X/EG24N9K4
Nominal size 6, symbol D, electromagnetically operated, 24 V DC
Hydraulic valve, directional valve, directional switch valve, directional spool valve, hydraulic directional spool valve, electromagnetic directional valve
Industrial hydraulic valves in the high performance range. Reliable switching of oil flow direction according to hydraulic symbol.
slide valve
direct drive
product attribute
Connection diagram   ISO 4401-03-02-0-05
Product Series WE6./ E
Operating pressure [bar]   350
Flow rate [l/min]   70
Slide valve symbol   Symbol D
Connection Type   Base Plate Installation
size 6.
Drive Type   Solenoid Drive
Number of ports 4.
Number of switching positions 2.
Supply voltage   24 VDC
Electrical connector   3 pole connector (2+PE)
Electrical connection description   3-pole connector (2+PE) according to EN 175301-803
Hydraulic fluids   HL, HLP, HLPD, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.46

Rexroth REXROTH solenoid valve
R901000176 4WE6W62/EG12N9K4
Nominal size 6, symbol W, electromagnetically operated, 12 V DC
Hydraulic valve, directional valve, directional switch valve, directional spool valve, hydraulic directional spool valve, electromagnetic directional valve
Industrial hydraulic valves in the high performance range. Reliable switching of oil flow direction according to hydraulic symbol.
slide valve
direct drive
product attribute
Connection diagram   ISO 4401-03-02-0-05
Product Series WE6./ E
Operating pressure [bar]   350
Flow rate [l/min]   80
Slide valve symbol   Symbol W
size 6.
Drive Type   Solenoid Drive
Number of ports 4.
Number of switching positions 3.
Supply voltage   12 V DC
Electrical connector   3 pole connector (2+PE)
Electrical connection description   3-pole connector (2+PE) according to EN 175301-803
Hydraulic fluids   HL, HLP, HLPD, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.98

Rexroth REXROTH solenoid valve
R901127980 4WE6D6X/OFEW230N9K4/B12
Nominal size 6, symbol D, electromagnetically operated, 230 V AC 50/60Hz
Hydraulic valve, directional valve, directional switch valve, directional spool valve, hydraulic directional spool valve, electromagnetic directional valve
Industrial hydraulic valves in the high performance range. Reliable switching of oil flow direction according to hydraulic symbol.
slide valve
direct drive
product attribute
Connection diagram   ISO 4401-03-02-0-05
Product Series WE6./ E
Operating pressure [bar]   350
Flow rate [l/min]   60
Slide valve symbol   Symbol D
size 6.
Drive Type   Solenoid Drive
Number of ports 4.
Number of switching positions 2.
Supply voltage   230 VAC 50/60Hz
Electrical connector   3 pole connector (2+PE)
Electrical connection description   3-pole connector (2+PE) according to EN 175301-803
   CE– Low Voltage Directive 2014/35/EU
Hydraulic fluids   HL, HLP, HLPD, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.68

Rexroth REXROTH solenoid valve
R900911948 4WE6Y62/EG24N9K4QMBG24
Nominal size 6, symbol Y, electromagnetic operated, 24 V DC, with position sensing switch QM
Hydraulic valve, directional valve, directional switch valve, directional spool valve, hydraulic directional spool valve, electromagnetic directional valve
Industrial hydraulic valves in the high performance range. Reliable switching of oil flow direction according to hydraulic symbol.
slide valve
direct drive
product attribute
Connection diagram   ISO 4401-03-02-0-05
Product Series WE6./ E
Operating pressure [bar]   350
Flow rate [l/min]   70
Slide valve symbol   Symbol Y
size 6.
Drive Type   Solenoid Drive
Number of ports 4.
Number of switching positions 2.
Supply voltage   24 VDC
Electrical connector   3 pole connector (2+PE)
Electrical connection description   3-pole connector (2+PE) in accordance with EN 175301-803
Hydraulic fluids   HL, HLP, HLPD, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.66

Rexroth REXROTH solenoid valve
R900913276 4WE6X7-62/EG24N9K4
Nominal size 6, symbol X7, with electromagnetic operation, 24 VDC
Hydraulic valve, directional valve, directional switch valve, directional spool valve, hydraulic directional spool valve, electromagnetic directional valve
Industrial hydraulic valves in the high performance range. Reliable switching of oil flow direction according to hydraulic symbols
slide valve
direct drive
product attribute
connection diagram
ISO 4401-03-02-0-05
Product Series WE6./ E
Operating pressure [bar]   350
Flow rate [l/min]   80
Slide valve symbol   Symbol X7
Connection Type   Base Plate Installation
size 6.
Drive Type   Solenoid Drive
Number of ports 4.
Supply voltage   24 VDC
Electrical connector   3 pole connector (2+PE)
Electrical connection description   3-pole connector (2+PE) according to EN 175301-803
Hydraulic fluids   HL, HLP, HLPD, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.46

Rexroth REXROTH solenoid valve
R900912493 4WE6G6X/EW230N9K4
Nominal size 6, symbol G, electromagnetically operated, 230 V AC 50/60Hz
Industrial hydraulic valves in the high performance range. Reliable switching of oil flow direction according to hydraulic symbol.
slide valve
direct drive
product attribute
connection diagram
ISO 4401-03-02-0-05
Product Series WE6./ E
Operating pressure [bar]   350
Flow rate [l/min]   40
Slide valve symbol   Symbol G
Connection Type   Base Plate Installation
size 6.
Drive Type   Solenoid Drive
Number of ports 4.
Number of switching positions 3.
Supply voltage   230 VAC 50/60Hz
Electrical connector   3 pole connector (2+PE)
Electrical connection description   3-pole connector (2+PE) according to EN 175301-803
   CE– Low Voltage Directive 2014/35/EU
Hydraulic fluids   HL, HLP, HLPD, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.72

Rexroth REXROTH solenoid valve
R901068595 4WE6D6X/EG24N9K4/ZV
Nominal size 6, symbol D, electromagnetically operated, 24 V DC
Hydraulic valve, directional valve, directional switch valve, directional spool valve, hydraulic directional spool valve, electromagnetic directional valve
Industrial hydraulic valves in the high performance range. Reliable switching of oil flow direction according to hydraulic symbol.
slide valve
direct drive
product attribute
Connection diagram   ISO 4401-03-02-0-05
Product Series WE6./ E
Operating pressure [bar]   350
Flow rate [l/min]   70
Slide valve symbol   Symbol D
size 6.
Drive Type   Solenoid Drive
Number of ports 4.
Number of switching positions 2.
Supply voltage   24 VDC
Electrical connector   3 pole connector (2+PE)
Electrical connection description   3-pole connector (2+PE) according to EN 175301-803
Hydraulic fluids   HL, HLP, HLPD, HVLP, HVLPD, HETG, HEES, HEPG, HFDU, HFDR
Sealed  FKM
Weight [kg]   1.44

Rexroth REXROTH solenoid valve
R900912411 4WE6Y62/EG24N9K4/B15
Nominal size 6, symbol Y, electromagnetically operated, 24 V DC
Hydraulic valve, directional valve, directional switch valve, directional spool valve, hydraulic directional spool valve, electromagnetic directional valve
Industrial hydraulic valves in the high performance range. Reliable switching of oil flow direction according to hydraulic symbol.
slide valve
direct drive
product attribute
Connection diagram   ISO 4401-03-02-0-05
Product Series WE6./ E
Operating pressure [bar]   350
Flow rate [l/min]   70
Slide valve symbol   Symbol Y
size 6.
Drive Type   Solenoid Drive
Number of ports 4.
Number of switching positions 2.
Supply voltage   24 VDC
Electrical connector   3 pole connector (2+PE)
Electrical connection description   3-pole connector (2+PE) in accordance with EN 175301-803
Hydraulic fluids   HL, HLP, HLPD, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.44


Rexroth REXROTH Solenoid R901370939
Solenoid coil 45-K4___-30G24___04
Voltage  DC24V
Diameter  6mm
mounting  thread
Weight  0.3kg

Rexroth REXROTH SEAL KIT R900357573
Seal Kit WE 6.6X/E
Weight  0.1kg


Rexroth REXROTH solenoid valve 4WE6J6X/EG24N9K4
R900561288 4WE6J62/EG24N9K4
Nominal size 6, symbol J, electric with magnet, 24 V DC
Industrial hydraulic valves for high power ranges. Reliable switching of oil flow according to hydraulic symbols
direct acting
slide valve
product feature
Connection type  ISO 4401-03-02-0-05
Pressure [bar]   350
Volume flow [l/min]   80
Piston Symbol   Symbol J
Connection Type   Plate Structure
Nominal size 6.
Type of operation   with magnetic drive
Number of connections 4.
Number of switch positions 3.
Supply voltage   24 VDC
Electrical plug   3 pin (2+PE)
Electrical connection description   Device plug 3-pin (2+PE) according to EN 175301-803
Pressure fluid   HLP, HLP, hdpd, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.99


Rexroth REXROTH solenoid valve 4WE6Y6X/EW230N9K4
R900909415 4WE6Y62/EW230N9K4
Nominal size 6, symbol Y, electric with magnet, 230 V AC 50/60Hz
Industrial hydraulic valves for high power ranges. Reliable switching of oil flow according to hydraulic symbols
slide valve
direct acting
product feature
Connection type   ISO 4401-03-02-0-05
Pressure [bar]   350
Volume flow [l/min]   60
Piston Symbol   Symbol Y
Nominal size   6
Type of operation   with magnetic drive
Number of connections   4
Number of switch positions   2
Power supply voltage   230 VAC 50/60Hz
Electrical plug   3 pin (2° PE)
Electrical connection description   Device plug 3-pin (2 PE) according to EN 175301-803
CE   , Low Voltage Directive 2014/35/EUCSA Approved according to CSA C22.2 No. 139-1982
Pressure fluid   HLP, HLP, hdpd, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.320

Rexroth REXROTH solenoid valve 4WE6Y6X/EG24N9K4QMAG24
R900923204 4WE6Y62/EG24N9K4QMAG24
Nominal size 6, symbol Y, electric with magnet, 24 V DC
Industrial hydraulic valves for high power ranges. Reliable switching of oil flow according to hydraulic symbols
With spool position monitoring A
direct acting
slide valve
product feature
Connection type   ISO 4401-03-02-0-05
Pressure [bar]   350
Volume flow [l/min]   70
Piston Symbol   Symbol Y
Nominal size   6
Type of operation   with magnetic drive
Number of connections 4.
Number of switch positions 2.
Supply voltage   24 VDC
Electrical plug   3 pin (2+PE)
Electrical connection description   Device plug 3-pin (2+PE) according to EN 175301-803
Pressure fluid   HLP, HLP, hdpd, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.650

Rexroth REXROTH solenoid valve 4WE6Y6X/EG24N9K4/V
R900909636 4WE6Y62/EG24N9K4/V
Nominal size 6, symbol Y, electric with magnet, 24 V DC
Industrial hydraulic valves for high power ranges. Reliable switching of oil flow according to hydraulic symbols
direct acting
slide valve
product feature
Connection type   ISO 4401-03-02-0-05
Pressure [bar]   350
Volume flow [l/min]   70
Piston Symbol   Symbol Y
Connection Type   Plate Structure
Nominal size   6
Type of operation   with magnetic drive
Number of connections   4
Number of switch positions   2
Supply voltage   24 VDC
Electrical plug   3 pin (2+PE)
Electrical connection description   Device plug 3-pin (2+PE) according to EN 175301-803
Pressure fluid   HLP, HLP, hdd, HVLP, HVLPD, HETG, HEES, HEPG, HFDU, HFDR
Seal   FKM
Weight [kg]   1.461

Rexroth REXROTH solenoid valve R900561276 4WE6Y6X/EG24N9K4
R900561276 4WE6Y62/EG24N9K4
Nominal size 6, symbol Y, electric with magnet, 24 V DC
Industrial hydraulic valves for high power ranges. Reliable switching of oil flow according to hydraulic symbols
direct acting
slide valve
product feature
Connection type   ISO 4401-03-02-0-05
Pressure [bar]   350
Volume flow [l/min]   70
Piston Symbol   Symbol Y
Connection Type   Plate Structure
Nominal size   6
Type of operation   with magnetic drive
Number of connections   4
Number of switch positions   2
Supply voltage   24 VDC
Electrical plug   3 pin (2+PE)
Electrical connection description   Device plug 3-pin (2+PE) according to EN 175301-803
Pressure fluid   HLP, HLP, hdpd, HVLP, HVLPD, HFC
Seal   NBR
Weight [kg]   1.455
Rexroth hydraulic vane pump PV7-2X/20-25RA01MA0-10